Soldered Tone Holes

Caminetti Saldati

modello
“1818“
PRODOTTO A MANO
POSSIBILITÀ DI RICHIEDERE VARIANTI ALLE CARATTERISTICHE STANDARD
TAPPO IN TITANIO OPZIONALE: + 30 Euro
Se avete altre preferenze, chiedete!
Il nostro modello “1818” si discosta nettamente dai classici
flauti in alpacca della stessa fascia di prezzo in quanto è prodotto a mano.
Caratteristica che si evince non solo dai caminetti accuratamente saldati
(e non estratti), ma anche per la grande attenzione nei particolari.
Materiale | Testata,Corpo, Trombino in alpacca argentata Doppio Strato di argentatura Particolare lavorazione dell’argentatura: costruiamo solo flauti argentati perchè diversamente la finitura nickelata potrebbe dare luogo a comprovati fenomeni allergici, oltre a rendere la superfice del flauto opaca. La Briccialdi esegue un triplo strato di argentatura che conferisce alla superfice del flauto maggior resistenza ai fenomeni ossidativi causati da sudorazione o agenti atmosferici, oltre a rendere il suono più ricco e caldo. OPZIONE: Placcatura Rose Gold flash (+ 320 Euro) |
Caminetti Saldati | i caminetti vengono lavorati separatamente e poi vengono saldati in corrispondenza dei fori sul tubo. In questo modo il caminetto ha una parete visibilmente più spessa Un altro elemento di particolare interesse è l’arrotondamento degli spigoli interni (undercutting) e l’esecuzione di alcune svasature che migliorano la risposta acustica del flauto. I caminetti saldati sono tipici di una lavorazione artigianale, molto impegnativa e costosa. Però a fronte di questo maggiore costo, il bordo del caminetto sarà sempre regolare e pianeggiante con indiscutibili vantaggi nell’affidabilità della chiusura ermetica dei tamponi, oltre che conferirà al flauto un suono più caldo e corposo (per via del maggiore spessore dei caminetti saldati rispetto a quelli estrusi) |
Tappo e Corona in Titanio
OPZIONALE |
TAPPO A VITE NUOVO SISTEMA che lascia vibrare più liberamente la testata. è un particolare dispositivo che sostituisce il normale tappo a vite in sughero con un altro costruito a mano in TITANIO il quale rende il suono più chiaro e controllabile ad ogni registro. INSTALLATO A RICHIESTA: + 30 Euro |
Trombino | Discendente al Do.
A richiesta è possibile ordinare il trombino discendente al Si. |
Testata | I nostri modelli serie 1818 sono provvisti di una nostra testata dalla pronta emissione ed eccellente suono, apprezzata da molti flautisti.
A richiesta è possibile dotare il flauto di una testata d’argento. TESTATA D’ARGENTO OPZIONALE: + 300 Euro |
Mi snodato o senza Mi snodato |
è una particolare leva che consente di emettere il MI acuto con più facilità |
Tamponi Pisoni | “Deluxe Yellow J” vescica gialla doppia, feltro pressato trattato speciale. I tamponi sono tra gli elementi più importanti di un flauto. E la Flauti Briccialdi ha deciso di affidarsi esclusivamente alla Music Center per la fornitura di cuscinetti. Azienda leader mondiale in questo campo. Risultato di un perfetto connubio di tradizione artigianale italiana, elevata qualità dei materiali ed avanzata tecnologia industriale. |
Fori Aperti (corredati da tappini) | E’ un foro al centro del tasto da chiudere direttamente con il polpastrello. In questo modo l’aria che scorre all’inteno del flauto è a contatto con le dita ed è possibile eseguire i glissati spostando il dito sul tasto, in modo da aprirlo gradualmente. Inoltre l’apertura dei fori consente maggiore vibrazione della colonna d’aria all’interno del tubo con conseguente aumento di sonorità. Invece per il flautista alle prime armi, i fori aperti hanno lo scopo didattico di insegnare a sistemare correttamente le dita sulla tastiera in modo da perdere da subito quei difetti di postura delle mani che causano una tecnica instabile. I tappini in dotazione servono per poter chiudere il foro e quindi imparare a suonare il flauto a fori aperti gradualmente A richiesta è possibile ordinare i fori chiusi. |
Sol fuori linea | Il sol fuori linea permette al dito anulare della mano sinistra di raggiungere il tasto Sol con più facilità.
A richiesta è possibile avere il Sol in linea. |
French Pointed Arms (braccetti alla francese) |
è un perno che arriva fino al centro del tasto conferendogli maggiore forza durante la fase di chiusura ed anche più robustezza evitando che il tasto si deformi con il tempo |
Accessori |
Panno per la pulizia esterna e scovolino in legno.
OPZIONALE: Elegante astuccio in lego sagomato + borsa: + 80 Euro |
(We produce customized flutes and you can modify the standard features)
Contact us to know availability and waiting time
Model “1818”
HANDMADE
Our model “1818” is produced handmade.
This feature emerges not only from tone holes accurately soldered (and not extracted),
also for the great attention to details.
If you desire to pay directly in USD, please contact us!
Material | Silver plated keys, headjoint, body and footjoint (german silver)
OPTIONAL Flash Rose gold plating (+320 €) |
Soldered Tone Holes | Since drawn and rolled toneholes are constructed from the flute tube itself, the flute has slightly less metal and weight than a flute with soldered toneholes. A thicker tube will generally provide a darker, richer sound. Many flutists find that they can achieve the flexibility they desire along with the complexity of sound typically associated with soldered toneholes by selecting the optimal tubing thickness. Because soldered toneholes are made separately from the flute tube, they are by nature thicker than drawn and rolled toneholes. This characteristic, combined with the solder or braze that is used to fuse the toneholes to the flute tube, brings more weight to the tube. The result is a flute with positive resistance and a dark, dense sound. Soldered toneholes are generally a good choice for flutists who play with a fast and compact air stream by providing stability without overpowering the flute.The soldered tone holes are perfectly flat so the the pads closing are more reliable over time |
New system Headjoint TITANIUM Stopper plug OPTIONAL |
This is a device that replaces the standard cork stopper. It leaves the headjoint to vibrate more freely thanks to the very small contact surface (has only one little rubber gasket, installed and centered handmade). It consists of one piece to fit in the same way you mount the standard cork stopper. It is made of TITANIUM, oxidation resistant almost as platinum, extraordinary hardness/weight ratio. It weighs about 40% less than steel but with similar resistance. This system will make your flute easier to play at lower notes, and especially the second and third octave sound become warmer and ready. We can install on the headjoint: + 30 Euro |
Footjoint | C-Foot
You can order B-Foot at request. |
Headjoint | The flute has our powerful and good sound headjoint really appreciated by many flutists.
OPTIONAL STERLING SILVER HEADJOINT: + 300 Euro |
E-Mechanism or without E-Mechanism |
A split E mechanism allows venting only one G key while fingering high E. This facilitates production of the high E and it provides a more stable response.
At request you can order flute without E-mechanism |
Italian Pisoni Pads |
DELUXE J YELLOW: Double yellow bladder, pressed felt special treatment. The pads are among the most important elements of a flute. Briccialdi Flutes has decided to rely solely on the Luciano Pisoni Music Center (Trento- North Italy) for the supply of Bearings. World Leader in this field. Result of a perfect blend of Italian craft tradition, high quality materials and advanced manufacturing technology. |
Open Holes with plugs | central openings are covered by the fingertips when depressed. Students may use temporary plugs to cover the holes in the keys until they master the more precise finger placement needed to play open-hole keys. Some players state that open-hole keys permit louder and clearer sound projection in the flute’s lower register.Open holes can be used for effects such as bending and shading, and the player can crack some holes to bring pitch back up when playing softly on high register notes. Playing open holes requires and therefore develops fingering accuracy that is not essential on plateau keys. Some clever trills that make use of the open hole venting for better pitch. Open hole flutes can be used as closed hole by inserting plugs in the holes |
Offset G or In Line G |
the G keys are offset slightly from the rest of the keys, mounted on their own posts, separate from the other keys. A growing number of flutists prefer the comfort and hand position on the offset G flute.
At request you can order flute with IN LINE G |
French pointed arms |
A key design that connects keys to the rod with a raised, pointed arm which extends to the center of the key. Also refered to as “Styled keys”. It gives more strenght to the keys. |
Engraved Keys | It gives an elegant touch to the flute. Available at request + 150 Euro |
Case | wooden pipe cleaner. Cloth to clean the exterior flute surface. OPTIONAL: Elegant red wooden case + Bag: + 80 Euro |
“ARGENTO S2 Handmade“
CAMINETTI SALDATI
contattaci per saperne di più su ordine e modalità di prova
POSSIBILITÀ DI RICHIEDERE VARIANTI ALLE CARATTERISTICHE STANDARD
Prodotto con la massima cura dei particolari e realizzati a mano.
Sono installati tamponi sintetici Pisoni S2 e molle oro bianco.
Materiale | TESTATA, CORPO e TROMBINO in ARGENTO 925. Meccanica in alpacca argentata MOLLE: ORO bianco PLACCATURA VERO ORO 24kt OPZIONALE del fusto (+780 Euro). Questo tipo di placcatura non è solo colore. Ma è una reale aggiunta di vero oro 24kt a spessore sulla superficie interna ed esterna del fusto. Per questo motivo sarà molto più durevole e conferisce al flauto una qualità timbrica differente. Con un costo inferiore (+320 Euro) è possibile avere una placcatura rose gold “flash” (solo colore, senza spessore). OPZIONE: Meccanica chiavi, tasti, aste e colonnette in argento 925 (+2500 Euro) |
Caminetti SALDATI | i caminetti vengono lavorati separatamente e poi vengono saldati in corrispondenza dei fori sul tubo. In questo modo il caminetto ha una parete visibilmente più spessa Un altro elemento di particolare interesse è l’arrotondamento degli spigoli interni (undercutting) e l’esecuzione di alcune svasature che migliorano la risposta acustica del flauto. I caminetti saldati sono tipici di una lavorazione artigianale, molto impegnativa e costosa. Però a fronte di questo maggiore costo, il bordo del caminetto sarà sempre regolare e pianeggiante con indiscutibili vantaggi nell’affidabilità della chiusura ermetica dei tamponi, oltre che conferirà al flauto un suono più caldo e corposo (per via del maggiore spessore dei caminetti saldati rispetto a quelli estrusi) |
Tappo e Corona in Titanio | TAPPO A VITE NUOVO SISTEMA che lascia vibrare più liberamente la testata. è un particolare dispositivo che sostituisce il normale tappo a vite in sughero con un altro costruito a mano in TITANIO il quale rende il suono più chiaro e controllabile ad ogni registro. |
Trombino | Discendente al Si |
Testata | I modelli 7714 S2-Handmade sono provvisti della nostra testata fatta a mano in argento 925, dalla pronta emissione ed eccellente suono, apprezzato da molti flautisti.
PERSONALIZZAZIONE: possibilità di scelta tra 4 differenti tipi di testata, per avere il massimo della prestazione in base alla propria conformazione labiale |
Mi snodato o senza Mi snodato |
è una particolare leva che consente di emettere il MI acuto con più facilità |
Tamponi Sintetici Pisoni S2 |
sono installati i tamponi professionali sintetici Pisoni S2 con guscio e stabilizzatore in Delrin. LA MIGLIORE VESCICA DOPPIA Fra migliaia di metri il meglio per questi cuscinetti,personale specializzato seleziona solo il materialepiù liscio e più forte. SPECIALE MICROFIBRA PIATTELLO IN DELRIN DISCO IN CARTONE |
Fori Aperti (corredati da tappini) o Fori Chiusi |
E’ un foro al centro del tasto da chiudere direttamente con il polpastrello. In questo modo l’aria che scorre all’inteno del flauto è a contatto con le dita ed è possibile eseguire i glissati spostando il dito sul tasto, in modo da aprirlo gradualmente. Inoltre l’apertura dei fori consente maggiore vibrazione della colonna d’aria all’interno del tubo con conseguente aumento di sonorità. Invece per il flautista alle prime armi, i fori aperti hanno lo scopo didattico di insegnare a sistemare correttamente le dita sulla tastiera in modo da perdere da subito quei difetti di postura delle mani che causano una tecnica instabile. I tappini in dotazione servono per poter chiudere il foro e quindi imparare a suonare il flauto a fori aperti gradualmente |
Sol fuori linea o Sol in linea |
Possibilità di richiedere il Sol in linea. |
French Pointed Arms (braccetti alla francese) |
è un perno che arriva fino al centro del tasto conferendogli maggiore forza durante la fase di chiusura ed anche più robustezza evitando che il tasto si deformi con il tempo |
Accessori | Elegante Astuccio in LEGNO SAGOMATO + Borsa Scovolino pulizia in legno. |
Decorazioni sui tasti | Disponibili a richiesta, prezzo da concordare. |
PROFESSIONAL S2 Synthetic Pads
HANDMADE
Our model “Silver Series III” deviates significantly from the previous series,
as it is produced entirely handmade.
This feature emerges not only from tone holes accurately soldered (and not extracted),
also for the great attention to details.
(We produce customized flutes and you can modify the standard features)
Contact us to know availability and waiting time
Headjoint, body and footjoint
STERLING SILVER .925
Material | Headjoint, Body, footjoint: sterling 925 silver
Silver plated keys SPRINGS: White GOLD OPTIONAL TUBE TRUE 24kt GOLD plating (+780 €) (not keys). We add true 24kt gold plating on the internal and external tube surface , which makes the plating harder and more durable. It is not only colour! We add true thickness to the flute surface! Otherwise we can rose gold plate the tube only with colour (flash plating) without adding thickness. (+320 €) OPTIONAL: Sterling silver mechanics (Keys, rods, pivots): +2500 Euro |
Soldered Tone Holes | Since drawn and rolled toneholes are constructed from the flute tube itself, the flute has slightly less metal and weight than a flute with soldered toneholes. A thicker tube will generally provide a darker, richer sound. Many flutists find that they can achieve the flexibility they desire along with the complexity of sound typically associated with soldered toneholes by selecting the optimal tubing thickness. Because soldered toneholes are made separately from the flute tube, they are by nature thicker than drawn and rolled toneholes. This characteristic, combined with the solder or braze that is used to fuse the toneholes to the flute tube, brings more weight to the tube. The result is a flute with positive resistance and a dark, dense sound. Soldered toneholes are generally a good choice for flutists who play with a fast and compact air stream by providing stability without overpowering the flute.The soldered tone holes are perfectly flat so the the pads closing are more reliable over time |
New system Headjoint TITANIUM Stopper plug |
This is a device that replaces the standard cork stopper. It leaves the headjoint to vibrate more freely thanks to the very small contact surface (has only one little rubber gasket, installed and centered handmade). It consists of one piece to fit in the same way you mount the standard cork stopper. It is made of TITANIUM, oxidation resistant almost as platinum, extraordinary hardness/weight ratio. It weighs about 40% less than steel but with similar resistance. This system will make your flute easier to play at lower notes, and especially the second and third octave sound become warmer and ready. |
Footjoint | B-Foot |
Headjoint | CUSTOMIZATION: You can choice from our several sterling silver headjoints type. |
E-Mechanism or without E-Mechanism |
A split E mechanism allows venting only one G key while fingering high E. This facilitates production of the high E and it provides a more stable response.
At request you can order flute without E-mechanism |
Italian Pisoni S2 Synthetic pads |
THE FINEST DOUBLE BLADDER Among thousands meters of the best bladder for flute pads, specialized personnel select only the smoothest and strongest material. A SPECIAL MICROFIBRE DELRIN HALF-SHELL CARDBOARD DISC |
Open Holes with plugs | central openings are covered by the fingertips when depressed. Students may use temporary plugs to cover the holes in the keys until they master the more precise finger placement needed to play open-hole keys. Some players state that open-hole keys permit louder and clearer sound projection in the flute’s lower register.Open holes can be used for effects such as bending and shading, and the player can crack some holes to bring pitch back up when playing softly on high register notes. Playing open holes requires and therefore develops fingering accuracy that is not essential on plateau keys. Some clever trills that make use of the open hole venting for better pitch. Open hole flutes can be used as closed hole by inserting plugs in the holes |
Offset G or Inline G |
the G keys are offset slightly from the rest of the keys, mounted on their own posts, separate from the other keys. A growing number of flutists prefer the comfort and hand position on the offset G flute.
At request you can order flute with IN LINE G |
French pointed arms | A key design that connects keys to the rod with a raised, pointed arm which extends to the center of the key. Also refered to as “Styled keys”. It gives more strenght to the keys. |
Engraved Keys | It gives an elegant touch to the flute. Available at request. |
Case + Bag | Elegant red wooden case with bag |
modello
CAMINETTI SALDATI
POSSIBILITÀ DI RICHIEDERE VARIANTI ALLE CARATTERISTICHE STANDARD
e si contraddistingue non solo per una manifattura eccellente,
ma anche per una uova meccanica PINLESS ULTRATEC® perfezionata allo stato dell’arte
ed un fusto Heavy Wall che rende il suono ancora più pieno e potente!
Prodotto con la massima cura dei particolari e realizzato a mano.
Sono installati tamponi sintetici con stabilizzatori e molle di oro bianco.
Dotato della nostra nuova testata “Lectio Tertia” Heavy
Materiale____________ | TESTATA, CORPO e TROMBINO in ARGENTO 925. Meccanica in alpacca argentata MOLLE: ORO bianco PLACCATURA VERO ORO 24kt OPZIONALE del fusto (+780 Euro). Questo tipo di placcatura non è solo colore. Ma è una reale aggiunta di vero oro 24kt a spessore sulla superficie interna ed esterna del fusto. Per questo motivo sarà molto più durevole e conferisce al flauto una qualità timbrica differente.. OPZIONE: Meccanica chiavi, tasti, aste e colonnette in argento 925 (+3210 Euro) |
Caminetti SALDATI | i caminetti vengono lavorati separatamente e poi vengono saldati in corrispondenza dei fori sul tubo. In questo modo il caminetto ha una parete visibilmente più spessa Un altro elemento di particolare interesse è l’arrotondamento degli spigoli interni (undercutting) e l’esecuzione di alcune svasature che migliorano la risposta acustica del flauto. I caminetti saldati sono tipici di una lavorazione artigianale, molto impegnativa e costosa. Però a fronte di questo maggiore costo, il bordo del caminetto sarà sempre regolare e pianeggiante con indiscutibili vantaggi nell’affidabilità della chiusura ermetica dei tamponi, oltre che conferirà al flauto un suono più caldo e corposo (per via del maggiore spessore dei caminetti saldati rispetto a quelli estrusi) |
Tappo e Corona in Titanio | TAPPO A VITE NUOVO SISTEMA che lascia vibrare più liberamente la testata. È un particolare dispositivo che sostituisce il normale tappo a vite in sughero con un altro costruito a mano in TITANIO il quale rende il suono più chiaro e controllabile ad ogni registro. |
Trombino | Discendente al Si |
Testata |
Modello “Lectio Tertia” Handmade Heavy Wall 0,018” (0,45mm) dal timbro caldo e ben timbrato. Molto flessibile tra le ottave. PERSONALIZZAZIONE: possibilità di scelta tra 4 diversi tipi di testata (Step1, Step2, Step2 Heavy, Lectio Tertia) per poter avere il massimo delle prestazioni in base alla propria conformazione labiale. |
Meccanica | su questo flauto abbiamo installato per la prima volta una meccanica senza spine dal design esclusivo, denominata pinless ULTRATEC®, che consente la massima precisione e silenziosità. La nostra meccanica ULTRATEC® è caratterizzata dalla totale assenza di viti di regolazione e tramite una serie di leve particolari impedisce che i tasti si sregolino con facilità (come invece accade per i flauti con le classiche viti di regolazione), e consente una fluidità e manegevolezza senza precedenti, anche per i passaggi virtuosistici più difficili. |
Fusto | Heavy Wall 0,018” |
Mi snodato ____________ |
È una particolare leva che consente di emettere il MI acuto con più facilità |
Tamponi Sintetici STRAUBINGER |
I tamponi sintetici, che sono realizzati con una base di plastica ed una resistente pelle sintetica, sono stati ampiamente adottati come componenti essenziali per un flauto di alta qualità artigianale. Rispetto ai tradizionali tamponi in feltro e carta che richiedono frequenti regolazioni, i tamponi sintetici con stabilizatore sono più tolleranti alle variazioni ambientali e rimangono in condizioni ottimali per un periodo più lungo di tempo. Il vantaggio sta nel fatto che non assorbono l’umidità e di conseguenza non cambiano la forma. Questa costruzione dà ai tamponi un elevato grado di affidabilità. Permettono all’esecutore di ottenere una risposta chiara, con un suono più completo e sfumato. |
Fori Aperti (corredati da tappini) |
E’ un foro al centro del tasto da chiudere direttamente con il polpastrello. In questo modo l’aria che scorre all’inteno del flauto è a contatto con le dita ed è possibile eseguire i glissati spostando il dito sul tasto, in modo da aprirlo gradualmente. Inoltre l’apertura dei fori consente maggiore vibrazione della colonna d’aria all’interno del tubo con conseguente aumento di sonorità. Invece per il flautista alle prime armi, i fori aperti hanno lo scopo didattico di insegnare a sistemare correttamente le dita sulla tastiera in modo da perdere da subito quei difetti di postura delle mani che causano una tecnica instabile. I tappini in dotazione servono per poter chiudere il foro e quindi imparare a suonare il flauto a fori aperti gradualmente |
Sol in linea |
SOL FUORI LINEA + MI SNODATO oppure SOL in LINEA (senza Mi snodato) |
French Pointed Arms (braccetti alla francese) |
È un perno che arriva fino al centro del tasto conferendogli maggiore forza durante la fase di chiusura ed anche più robustezza evitando che il tasto si deformi con il tempo |
Accessori | Elegante Astuccio in LEGNO SAGOMATO + Borsa Scovolino pulizia in legno. |
SOLDERED TONE HOLES
HEAVY WALL
PROFESSIONAL STRAUBINGER Synthetic Pads with Stabilizer
Contact us to know availability and waiting time
Headjoint, body and footjoint
STERLING SILVER .925
and it is distinguished not only for excellent craftsmanship,
but also for an improved mechanic PINLESS ULTRATEC®. It’s the best mechanic you can desire
It has Heavy Wall body that makes the sound more full and powerful!
Produced with the utmost attention to detail and hand-made.
Installed SYNTHETIC PADS and white gold springs.
The headjoint included is our new “Lectio Tertia” heavy model
Material | Headjoint, Body, footjoint: sterling 925 silver Silver plated keys SPRINGS: White GOLD OPTIONAL TUBE YELLOW TRUE 24kt gold plating (+780 €) (not keys). We add true 24kt gold plating on the internal and external tube surface , which makes the plating harder and more durable. It is not only colour! We add true thickness to the flute surface! OPTIONAL: Sterling silver mechanics (Keys, rods, pivots): +3210 Euro |
Soldered Tone holes | Since drawn and rolled toneholes are constructed from the flute tube itself, the flute has slightly less metal and weight than a flute with soldered toneholes. A thicker tube will generally provide a darker, richer sound. Many flutists find that they can achieve the flexibility they desire along with the complexity of sound typically associated with soldered toneholes by selecting the optimal tubing thickness. Because soldered toneholes are made separately from the flute tube, they are by nature thicker than drawn and rolled toneholes. This characteristic, combined with the solder or braze that is used to fuse the toneholes to the flute tube, brings more weight to the tube. The result is a flute with positive resistance and a dark, dense sound. Soldered toneholes are generally a good choice for flutists who play with a fast and compact air stream by providing stability without overpowering the flute.The soldered tone holes are perfectly flat so the the pads closing are more reliable over time |
New system Headjoint TITANIUM Stopper plug________________ |
This is a device that replaces the standard cork stopper. It leaves the headjoint to vibrate more freely thanks to the very small contact surface (has only one little rubber gasket, installed and centered handmade). It consists of one piece to fit in the same way you mount the standard cork stopper. It is made of TITANIUM, oxidation resistant almost as platinum, extraordinary hardness/weight ratio. It weighs about 40% less than steel but with similar resistance. This system will make your flute easier to play at lower notes, and especially the second and third octave sound become warmer and ready. |
Footjoint | B-Foot |
Headjoint | CUSTOMIZATION: You can choice from our several sterling silver headjoints type. |
Mechanic | we have installed for the first time a pinless mechanics with an exclusive design, called pinless ULTRATEC®, which allows maximum precision and silence. Our ULTRATEC® mechanics is characterized by the total absence of adjustment screws and a series of special levers prevents the keys from easily lose their settings, and allows fluidity and manageability never seen before, even for the most difficult virtuosic passages. |
Thickness Body | Heavy Wall 0,018” |
SYNTHETIC PADS HIGH PRECISION STRAUBINGER |
These world-renowned pads are made of mostly synthetic materials. The advantage of this is that they do not absorb moisture and as a result do not change shape. This consistency gives the pads a high degree of reliability. Synthetic pads with stabilizer, which are made using a stable plastic base and durable synthetic leather, have been widely adopted as essential components of a high quality Handmade flute. Compared to traditional felt and paper pads that require frequent adjustments, They are more tolerant of environmental change and remain in top playing condition for a longer period of time.Synthetic pads enables the player to achieve a clear response with a more mature, nuanced sound. |
Open Holes with plugs | central openings are covered by the fingertips when depressed. Students may use temporary plugs to cover the holes in the keys until they master the more precise finger placement needed to play open-hole keys. Some players state that open-hole keys permit louder and clearer sound projection in the flute’s lower register.Open holes can be used for effects such as bending and shading, and the player can crack some holes to bring pitch back up when playing softly on high register notes. Playing open holes requires and therefore develops fingering accuracy that is not essential on plateau keys. Some clever trills that make use of the open hole venting for better pitch. Open hole flutes can be used as closed hole by inserting plugs in the holes |
OFFSET G or IN LINE G |
OFFSET G + SPLIT E IN LINE G ( Without Split E) |
French Pointed Arms | A key design that connects keys to the rod with a raised, pointed arm which extends to the center of the key. Also refered to as “Styled keys”. It gives more strenght to the keys. |
Case + Bag | Elegant red wooden case with bag |